Carbon Steel Four Claws DIN1624 Furniture Four Prongs T Nuts

Four-claw nuts are often used in situations where high friction is required or where the nut needs to be secured to non-traditional surfaces, such as automobiles, mechanical equipment, building structures or furniture assembly. In addition, it may be used in situations where frequent disassembly is required, as the four-jaw design may be easier to loosen.

In order to ensure the fastening effect of four-jaw nuts during use, measures can be taken from the selection of nuts and supporting parts, operation specifications during installation, follow-up inspection and maintenance, etc., as follows:

Nut and accessory parts selection

Select the right specification: According to the required load, the size and material of the connecting parts and other factors, select the right specification of the four-jaw nut. Ensure that the nominal diameter, pitch, length and other parameters of the nut are matched with the bolt or screw and the connected part to ensure sufficient connection strength and fastening effect.

Consider material performance: According to the use of the environment and working requirements, choose the appropriate material of the four-claw nut. If in high temperature environment, should choose the nut of high temperature resistant material; In an environment where there is a risk of corrosion, nuts made of stainless steel or other corrosion-resistant materials should be selected to prevent the performance of nuts from decreasing due to material problems and affecting the fastening effect.

With suitable bolts and washers: Four-jaw nuts should be used with bolts or screws of good quality and matching accuracy. At the same time, according to the need to choose a reasonable washer, such as flat washer can increase the contact area between the nut and the connected part, disperse the pressure; Spring washers or lock washers provide additional lock action for enhanced tightening.